+86-769-81550838

Categories

Home > Products > scrap tire recycling machine manufacture

scrap tire recycling machine manufacture

  • OTR tire recycling-5000 Hydralic Sidewall Cutting machine

    Contact Now

    OTR tire recycling-5000 Hydralic Sidewall Cutting machine

    Power:22.5kw (disposed size:external diameter ≤ 4.6m ,width ≤ 1.2m,inner rim ≤ 51 inch,weight ≤ 5 ton ),single side cut time is 3-6min. Outline dimension 3500mmX2100mmX4000mm Operating instructions:Putting the tire on the disc platform,then fix the tire the disc platform,and turn on the voltage...

  • Used and waste tyre recyling plant with less labor and less power consumption

    Contact Now

    Used and waste tyre recyling plant with less labor and less power consumption

    Tyre recycling plant FCC10000/40 is specially designed to recycle radial tires(only little or no fiber) to produce 20-40mesh rubber powder.The bias fiber tires not can be processed ,because this plant can not separate fiber fluff.It is a fully automatic tire recycling plant with air purifier,this plant can be matched with rubberized asphalt plant or reclaimed rubber factory as a whole tire recycling project.

  • OTR tire recycling-9000 Telecontrol Sidewall Strip Cutting Machine.

    Contact Now

    OTR tire recycling-9000 Telecontrol Sidewall Strip Cutting Machine.

    Power: 60Kw(Cutter diameter 650mm with 6 sets different caliber rotating platform ),the sidewall strip cutting time is 5 min/pcs,the o utline dimension is 4500mmX1600mmX1800mm ,and the machine wight is 3 tons. Operating instructions: 1. Start up the the main motor,prepare inputing the material...

  • OTR tire recycling-1000 Hydralic Tread Strip Cutter Unit.

    Contact Now

    OTR tire recycling-1000 Hydralic Tread Strip Cutter Unit.

    1000 Hydralic tread strip cutter unit. Power:110kw (cutter diameter 800mm ).the tread need 8 min for cutting strip; the outline size is 4500mmX4500mmX1600mm,and the machine weight is Operating instructions: 1. Start up the the main motor,prepare inputing the material after the machine running...