+86-769-81550838

Categories

Home > Products > tire recycling machine

tire recycling machine

  • Used waste car tire and passenger tire debeader extracting steel wire

    Contact Now

    Used waste car tire and passenger tire debeader extracting steel wire

    Car tire debeader is used for removing car tires bead wire.this machine is optional.it is the pretreatment machine for the whole completed tire recycling plant.this machine can protect the blades in the following shredding ang granulating machine.

  • SG1200 Twin Hook Tire Debeader Removing The Bead Wire

    Contact Now

    SG1200 Twin Hook Tire Debeader Removing The Bead Wire

    1. Introduction Twin hook tire debeader is used for removing the steel wire from two bead of a tire without any depossed,is the front processdure of whole tire smashed and cutted. 2. Part: Electric engine,reducer,transmission gear,disc hook,cross board,shoe plant,bearing block,feeding...

  • Top-sale Automatic Waste Tires Recycling Plant丨Tire Recycling Equipment Solutions

    Contact Now

    Top-sale Automatic Waste Tires Recycling Plant丨Tire Recycling Equipment Solutions

    Yuntong Fully automatic tire recycling plant can be customized with customer requirements.The capacity can process 1ton waste tires per hour to 10tons per hour.the recycled rubber can be 1-5mm ground rubber ,20-120mesh crumb rubber.this tire recycling plant also have advantage of less occupied space, long lifespan,safe operation,clean working environment.

  • High quality rubber granulator for sale-waste tyre recycling machine manufacture

    Contact Now

    High quality rubber granulator for sale-waste tyre recycling machine manufacture

    No.1 Quality Rubber granulators for sale.This series granulators can granulate 400-2000kg rubber chips to be 3-18 rubber granules(used for rubber flooring material,like tiles,artificial grass,running track) per hour.The bales for the granulator are made with Japan Imported material and has V-shape design.The blades has 4 same avaible side for granulating,compared with traditional blades,the lifespan is enhanced greatly.welcome to contact for more further information

  • Glue Mixer In Tire Retreading Plant

    Contact Now

    Glue Mixer In Tire Retreading Plant

    1.Standard configuration function description: a.Glue mixer is used for make the rubber cement and temporary storage.. b.Assemble the explosion-proof motor and explosion-proof power switch,when the gas volatilize meet the electire spark,it is very easy to proof explosion ,good sealing...

  • Tire Repairing Machine In Tire Retreading Plant

    Contact Now

    Tire Repairing Machine In Tire Retreading Plant

    1.Standard configuration function description: a.Tire repairing machine is used for repairing tires,it can repaire 650-1200 tires. 2.Technical parameters: a.Size:650*158*115mm. b.Weight:24.3kg. c.Voltage:AC220V. d.Power:550W*2. e.Tempreture rang:145 °c-265 °c.

  • Tire Buffing Machine

    Contact Now

    Tire Buffing Machine

    1.Standard configuration function description Buffing macine is used for buffing off the old pattern rubber on the suface of tire,afterbuffing the tire surface is exquisite and can reach to similar to the new tire surface radian requirement. 1.Radius of radian range is 400-800mm. 2.Expansion...

  • Indstrial Rubber Grinding And Milling Machine For Rubber Powde

    Contact Now

    Indstrial Rubber Grinding And Milling Machine For Rubber Powde

    Rubber Grinder is the equipment of choice for many industrial rubber compounding (such as EPDM, SBR, NBR, Butyl and many more natural and synthetic rubber materials. From rough grind sizes to crumb rubber. ) and processing facilities. It is used to grind rubber granules of 1-6mm to be 20-120 mesh fine rubber powder at ambient temperature.This grinder is mainly used to produce fine rubber powder like 40mesh,60mesh,80mesh,100mesh rubber powder.Yuntong can offer different powder grinding plant and grinding disc(disk) and system with customer requirements.welcome to visit.

  • OTR tire recycling-5000 Hydralic Sidewall Cutting machine

    Contact Now

    OTR tire recycling-5000 Hydralic Sidewall Cutting machine

    Power:22.5kw (disposed size:external diameter ≤ 4.6m ,width ≤ 1.2m,inner rim ≤ 51 inch,weight ≤ 5 ton ),single side cut time is 3-6min. Outline dimension 3500mmX2100mmX4000mm Operating instructions:Putting the tire on the disc platform,then fix the tire the disc platform,and turn on the voltage...

  • Wheel Rim Fixing Machine In Tire Retreading Plant

    Contact Now

    Wheel Rim Fixing Machine In Tire Retreading Plant

    1.Standard configuration function description: a.Wheel rim fixing machine is used for loading and unloading the wheel rim. b.The unique ball design,improve work efficiency ,prolong the wheel rim service life, . 2.Technical parameters: a.Size:1500*1200*2000mm b.Suitable for the wheel rim...