Product Categories

You are here: Home > Products > Waste Tires Recycling Plant > Fully Automatic Waste Tires Recycling Plants > Content

Fully Automatic Waste Tires Recycling Plants

RECOMEND Waste tires recycling turnkey solution 丨Scrap tire recycling equipment

Yuntong Recycling have tyre recycling solutions for processing of all types of tyres; whole car and truck tyres including mining tyre, super singles, earth mover tyres, OTR etc. The capacity of the systems range from 500-8.000 kg/production hour. The system is "multi-size” which means that the size of rubber granulate easily can be changed by merely altering the screen combination. During production of rubber granulate flexibility is a very important factor since the market demand of various fraction sizes will vary. Within tyre recycling the solutions from Yuntong are recognized to offer highest production output quality and flexibility as well as lowest operating and production costs.

    Technical Parameters

    Scrap Tyre recycling project 

    The car population of the world is rapidly increasing. In the 20th century automotive growth mainly took part in Europe and Northern America, but with the new millennium a wealthy middle class has sprung up in the rest of the world. Large countries like China and India have had an explosion in the number of private cars, and with more cars also more scrap tyres follow. 

    The leading tyre manufacturers of the world are working intensely to improve the durability of a set of tyres so that they can drive for more kilometers, but other factors such as increased focus on road safety and legislation prohibiting tyres that are too worn down, are pulling events in the opposite direction. 

    It is estimated that 13.5 m tonnes of tyres are scrapped every year. These figures include all sorts of tyres from car tyres to truck tyres and the huge tractor and earth moving tyres.


    Fully Automatic Waste Radial Tyre Recycling Plant-for crumb rubber production

    The processing procedure of  waste radial tyre recycling plant

    Tire recycling plant output product

    50*50mm chips

    Market use:

    TDF or TDA

    Offer Fuel for the cement,klin factory

    1-5mm rubber granules

    Market use:

    Playground,Running track,horse mat...

    20-40mesh rubber powder

    Market use:

    Reclaimed rubber,modified asphalt,water proof material...



    40-60mesh rubber 

    Market use:

    Molded rubber products

    mixed with new rubber or totally replace new rubber

    Waste scrap rubber radial and bias(fiber)tires recycling plant 
    for rubber granules and powder production

     

    Yuntong Turnkey Waste Tire Recycling Plants

    Make waste rubber shoes,rubber pipes,rubber belt,truck tires, car tires turn to be valuable resource:crumb rubber,steel and fiber

     

    Design Features:

    -          Durable double-shaft Heavy Duty Crushers

    -          Specially Fabricated Blades, 4 Times More Durable;

    -          Capacity: 2 – 10 Metric Tons/Hour

    -          The whole processing is going on with Room Temperatures

    -          Good quality crumb rubber: 99.9%  Steel or Fiber Textiles separated

    -          Compact Construction: Space saved and 30% energy power consumption saved

    -          Central Dust Filtering System and plasma smoke purifier Leaves No Pollution Emissions.

    -          The exquisite design make sure safe operation,workshop floor clean, no spontaneous combustion of powder

    waste tires recycling plant.jpg


    A typical Yuntong Tire Recycling Plant includes the following major components:

    1.Waste Tires-2.Tire cutter and Wire debeader—3. Tire Crusher---4.Rubber shredder(the first rubber granulator)---5.Magnetic separator-6.Vibrator--7. Secondary Rubber shredder(Secondary rubber granulator)—8Vibrating screen---9.Secondary Magnetic separator---10. Airflow classifier-—11. Storage Bin --12. Rubber grinder --13.Three-layer vibratory screen—14.Auto bag filler(Auto packing machine)

    -          Debeading Machines: Either a Combo of Cut and Pull or a Roller Ripping machine to extract the tire bead wires. This eases the crushing and shredding processes saving expensive cutters service life.

    -          Primary Crusher:Breaks down the entire tire into 50 x 50 mm chips;

    -          Granule Shredder: Reduces chips into 12mm granules.

    -          Magnetic Separator: Separates and discharges steel wires from the granules.

    -          Linear Vibratory Screener: Classifies fiber fluff from rubber granules.

    -          Secondary shredder: Further reduces the granules into 6mm or below sizes.

    -          Secondary and Third Magnetic Separations: These are belt mounted magnetic steel separators to further clean the rubber crumb from steel wires.

    -          Secondary Linear Vibratory Screener: Further cleans textile fluff from the smaller size rubber crumb.

    -          Cyclone Dust Collection System: Collects dust and fluff from granulating and shredding processes, preventing them from flying around into the open air.

    -          Conveyors: Belt or Screw Conveyers are used to feed or discharge the throughput of rubber shreds or granules. Screw Conveyers carry crumb in a sealed pipe hence no unwanted emission or spilling

    -          Fine Powder Grinders: these are a group of grinders for rubber crumb to achieve powder size of 30 or even 120 mesh.

    -          Air Sifters: Or airflow classifiers that separate and clean crumb from dust and textile fluff.

    -          Vibratory Tumbler Screening Machine: Classifies crumb into different sizes or grades.

    -          Flue Purifier: Removes smoke or dust from the discharged airflow.

    -          Auto packing: machine : pack the rubber powder with 25kg or 1000kg per bag

    Company Information

    Yuntong started tire recycling machine manufacturing since 1999 till now.all these years only focus on tire recycling technique and machine innovation and promotion.In China,Yuntong is the technique top leading company in tire recycling machine manufaturing.

    Yuntong can offer the unit tire shredder,granulator,grinder and fiber,steel separator machine for customers; Yuntong can offer the whole completed waste tires recycling plants ;besides Yuntong can offer the turnkey tire recycling solutions with customers requirements.

    With rich manufacturing experience and depth knowledge in marketing,Yuntong machine has been exported to Cezch,Cyprus,Iran,Russia,Uzbekistan,Turkmenistan,Saudi,Tobago,Peru,China,India,Indonesia ect many countries.

     

    tire recycling plant.jpg

    Overlook-Yuntong Environmental Machinery

    Scrap Tire Recycling Production line in workshop

    waste tire recycling (7).jpg

    1/input:1 tons tire per hour,tire size less than 1200mm

    2/output:700kg 20-80mesh crumb rubber,the scrap steel and textile is separated clearly and collected, the dust and ash is removed clearly,smoke and smell is absorbed.

    3/Power needed:302KW(3 phase ,380V/50HZ )

    4/Covering area:50x7x8m

    5/Total weight:approx 46tons

    7/Cooling method:Circular cooling water syste,Water tank needed:4x1.8x2m

    8/PLC fully automatic controller ,3 workers needed

    Waste Tire devrived material

    tire derived material.jpg

    Packaging of tire recycling machine and equipment:

    1/wrapped well with plastic film

    2/then packed tightly with customized woodcases


    Yuntong tire recycling plant

     Tire Recycling plant in CyprusTire recycling plant in SaudiTire recycling plant in India
     
     Tire recycling plant in ChinaTire recycling plant in UzebekistanTire recycling plant in Indonesia