+86-769-81550838

Categories

Home > Products > Waste Tires Recycling Plant > Content

High efficiency and good quality sports field machine unit

High efficiency  and good quality sports field machine unit

Sports field machine unit 1. Blender: Main application : Mixing hot resistant glue,color,rubber granules and other material together. Machine parameter : 2. Paving machine: Main application: It is a high automatic level plastic and rubber sporting field paving machine,which is equipped with...

Technical Parameters

Sports field machine unit

blob.png

 

1.Blender:

blob.png

Main application :

Mixing hot resistant glue,color,rubber granules and other material together.

Machine parameter :


Volume of hopper(L)

350

Mixing capacity(kg/circle)

200kg/0.2min

Rotation speed of main shaft(rpm)

72

Power(KW)

3

Weight(KG)

190

Dimension(L*W*Hmm)

1270*920*1270


2.Paving machine:

blob.png

Main application:

It is a high automatic level plastic and rubber sporting field paving machine,which is equipped with Siemens frequency stepless speed regulation of advanced ratchet lever system.with high efficiency, low consumption, high-quality and easy operation, with long-term use of authentication.

 

Machine parameter :

blob.png


3.Spraying machine:

blob.png

Main application:

Mainly used for spraying surface layer of air permeability or mixed type plastic cement stadiums,running track and sports field.

Machine parameter:

 

Volume for hopper L

150

Spraying capacity                                                                                 (kg/min)

15-18kg/min

Power (KW)

10

Air pressure (Mpa)

1

Amount of gas outpu 

2 cubic metre/min

Weight (KG)

450

Dimension                                                              L*W*Hmm)

1820*1000*1150

4.Line marking machine:


blob.png

Main application:

It is used to mark the line on the surface of the playground or running track .It has the following features as high flow capacity, wide application scope and easy operation. It is suitable for both the spray of ordinary paint and that of higher viscosity paint, such as oil paint, alkyd resin lacquer, nitro lacquer, epoxy resin lacquer and other kinds of paint.

 

Machine parameter:

Honda engine power(KW)

9.5

Marking speed(km/hour)

0.5-3

Common pressure(Mp)

10-20

Max flow rate(L/Min)

11.4

Weight (KG)

90

Dimension                                                                     L*W*Hmm)

750*420*660





Waste scrap rubber radial and bias(fiber)tires recycling plant 

for rubber granules and powder production


 tyre recycler

Yuntong Turnkey Waste Tire Recycling Plants

Make waste rubber shoes,rubber pipes,rubber belt,truck tires, car tires turn to be valuable resource:crumb rubber,steel and fiber

 

Design Features:

-          Durable double-shaft Heavy Duty Crushers

-          Specially Fabricated Blades, 4 Times More Durable;

-          Capacity: 2 – 10 Metric Tons/Hour

-          The whole processing is going on with Room Temperatures

-          Good quality crumb rubber: 99.9%  Steel or Fiber Textiles separated

-          Compact Construction: Space saved and 30% energy power consumption saved

-          Central Dust Filtering System and plasma smoke purifier Leaves No Pollution Emissions.

-          The exquisite design make sure safe operation,workshop floor clean, no spontaneous combustion of powder

tyre recycling machine


A typical Yuntong Tire Recycling Plant includes the following major components:

1.Waste Tires-2.Tire cutter and Wire debeader—3. Tire Crusher---4.Rubber shredder(the first rubber granulator)---5.Magnetic separator-6.Vibrator--7. Secondary Rubber shredder(Secondary rubber granulator)—8Vibrating screen---9.Secondary Magnetic separator---10. Airflow classifier-—11. Storage Bin --12. Rubber grinder --13.Three-layer vibratory screen—14.Auto bag filler(Auto packing machine)

-          Debeading Machines: Either a Combo of Cut and Pull or a Roller Ripping machine to extract the tire bead wires. This eases the crushing and shredding processes saving expensive cutters service life.

-          Primary Crusher:Breaks down the entire tire into 50 x 50 mm chips;

-          Granule Shredder: Reduces chips into 12mm granules.

-          Magnetic Separator: Separates and discharges steel wires from the granules.

-          Linear Vibratory Screener: Classifies fiber fluff from rubber granules.

-          Secondary shredder: Further reduces the granules into 6mm or below sizes.

-          Secondary and Third Magnetic Separations: These are belt mounted magnetic steel separators to further clean the rubber crumb from steel wires.

-          Secondary Linear Vibratory Screener: Further cleans textile fluff from the smaller size rubber crumb.

-          Cyclone Dust Collection System: Collects dust and fluff from granulating and shredding processes, preventing them from flying around into the open air.

-          Conveyors: Belt or Screw Conveyers are used to feed or discharge the throughput of rubber shreds or granules. Screw Conveyers carry crumb in a sealed pipe hence no unwanted emission or spilling

-          Fine Powder Grinders: these are a group of grinders for rubber crumb to achieve powder size of 30 or even 120 mesh.

-          Air Sifters: Or airflow classifiers that separate and clean crumb from dust and textile fluff.

-          Vibratory Tumbler Screening Machine: Classifies crumb into different sizes or grades.

-          Flue Purifier: Removes smoke or dust from the discharged airflow.

-          Auto packing: machine : pack the rubber powder with 25kg or 1000kg per bag

Company Information

Yuntong started tire recycling machine manufacturing since 1999 till now.all these years only focus on tire recycling technique and machine innovation and promotion.In China,Yuntong is the technique top leading company in tire recycling machine manufaturing.

Yuntong can offer the unit tire shredder,granulator,grinder and fiber,steel separator machine for customers; Yuntong can offer the whole completed waste tires recycling plants ;besides Yuntong can offer the turnkey tire recycling solutions with customers requirements.

With rich manufacturing experience and depth knowledge in marketing,Yuntong machine has been exported to Cezch,Cyprus,Iran,Russia,Uzbekistan,Turkmenistan,Saudi,Tobago,Peru,China,India,Indonesia ect many countries.

 

tire recycling solutions.jpgtire recycling plant.jpg

Overlook-Yuntong Environmental Machinery

Scrap Tire Recycling Production line in workshop

tire recycler

1/input:1 tons tire per hour,tire size less than 1200mm

2/output:700kg 20-80mesh crumb rubber,the scrap steel and textile is separated clearly and collected, the dust and ash is removed clearly,smoke and smell is absorbed.

3/Power needed:302KW(3 phase ,380V/50HZ )

4/Covering area:50x7x8m

5/Total weight:approx 46tons

7/Cooling method:Circular cooling water syste,Water tank needed:4x1.8x2m

8/PLC fully automatic controller ,3 workers needed

Waste Tire devrived material

rubber granules

Packaging of tire recycling machine and equipment:

1/wrapped well with plastic film

2/then packed tightly with customized woodcases


Yuntong tire recycling plant

tire recycling machine.jpg

 


Yuntong Environmental is one of the popular High efficiency and good quality sports field machine unit manufacturers and suppliers in China, welcome to order customized and discount High efficiency and good quality sports field machine unit at a good price through our website.